Operating System - HP-UX
1748152 Members
3503 Online
108758 Solutions
New Discussion юеВ

Re: install HBA for rp2470

 
SOLVED
Go to solution
terry123
Regular Advisor

install HBA for rp2470

hi All,

got a problem while installing a new HBA (A6795A) to HPUX 11.00 on a rp2470 system.

after install the HBA driver and inserted the HBA card to the system, by running #ioscan, it shows the following:

unknown -1 0/6/0/0 UNCLAIMED UNKNOWN PCI SerialBus (103c1029)

anyone can help?? thanks so much.

b.r.
terrytse
12 REPLIES 12
Torsten.
Acclaimed Contributor

Re: install HBA for rp2470

The driver is missing.

You need to install the driver from the first application CD.

A6795A B.11.00.10 PCI Tachyon TL/TS/XL2 Fibre Channel


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
terry123
Regular Advisor

Re: install HBA for rp2470

hi Torsten,

thx for the info.

but while try to install the driver, it failed with the following error message.
NOTE: Building a new kernel based on template file "/stand/system"
Generating module: krm...
Compiling /stand/build/conf.c...
Loading the kernel...
ld: I/O error, file "/usr/conf/lib/libfcms.a": Invalid argument
Fatal error.
*** Error exit code 1

Stop.
make failure.
Dennis Handly
Acclaimed Contributor

Re: install HBA for rp2470

>ld: I/O error, file "/usr/conf/lib/libfcms.a": Invalid argument

Does this file exist? Does cksum on that file give any error output?
terry123
Regular Advisor

Re: install HBA for rp2470

yes, the file exist, but was empty

# file /usr/conf/lib/*
/usr/conf/lib/btlan3_dbg.o: ELF-64 relocatable object file - PA-RISC 2.0 (LP64)
/usr/conf/lib/btlan5_dbg.o: ELF-64 relocatable object file - PA-RISC 2.0 (LP64)
/usr/conf/lib/btlan6_newdbg.o: ELF-64 relocatable object file - PA-RISC 2.0 (LP64)
/usr/conf/lib/fcms.o: empty
/usr/conf/lib/lan_dbg0.o: ELF-64 relocatable object file - PA-RISC 2.0 (LP64)
/usr/conf/lib/libautofs.a: archive file
/usr/conf/lib/libbtlan3.a: archive file
/usr/conf/lib/libbtlan5.a: archive file
/usr/conf/lib/libbtlan6.a: archive file
/usr/conf/lib/libcdfs.a: archive file
/usr/conf/lib/libcifs.a: cannot open
/usr/conf/lib/libdlkm.a: archive file
/usr/conf/lib/libfcgsc.a: archive file
/usr/conf/lib/libfcms.a: empty
/usr/conf/lib/libhp-ux.a: archive file
/usr/conf/lib/libinet.a: archive file
/usr/conf/lib/libipsec.a: archive file
/usr/conf/lib/libipsectp.a: archive file
Dennis Handly
Acclaimed Contributor
Solution

Re: install HBA for rp2470

>the file exist, but was empty

You need to get a copy from your backup.
It may also be in PHKL_23939.
terry123
Regular Advisor

Re: install HBA for rp2470

is that means after install the patch PHKL_23939, the file will be not empty?

thx so much.

b.r.
terrytse
Dennis Handly
Acclaimed Contributor

Re: install HBA for rp2470

>is that means after install the patch PHKL_23939, the file will be not empty?

Looking at the PHKL_23939, shows it has that file.
PHKL_31018 is the latest with a dependency on PHKL_18543.
terry123
Regular Advisor

Re: install HBA for rp2470

hi Dennis,

thx for the help.

after install the patch PHKL_23939 with dependency, the file still show empty.

however, i have copied it from another machine, then can install the HBA driver without problem.

thx so much for the information.

b.r.
terrytse
Dennis Handly
Acclaimed Contributor

Re: install HBA for rp2470

>thx so much for the information.

If you are happy with your answers, please read the following about assigning points:
http://forums.itrc.hp.com/service/forums/helptips.do?#33