cancel
Showing results for 
Search instead for 
Did you mean: 

install red-hat es3 x86 on dl360

SOLVED
Go to solution
arie shenar_1
Occasional Visitor

install red-hat es3 x86 on dl360

i can make red hat recognize the smart-array 6i. i did try the drivers provided by HP for DL360 G4.

arie shenar.
5 REPLIES
Vitaly Karasik_1
Honored Contributor

Re: install red-hat es3 x86 on dl360

I suggest you to use the latest [6] update for RHEL. You may download it from via rhn.redhat.com.

Rgds,
Vitaly
arie shenar_1
Occasional Visitor

Re: install red-hat es3 x86 on dl360

I need this current installation for compatibility reason.
Vitaly Karasik_1
Honored Contributor

Re: install red-hat es3 x86 on dl360

did you configure your RAID before RHEL installation?
NiCK_76
Respected Contributor

Re: install red-hat es3 x86 on dl360

Hi arie shenar,

What's your problem? If you don't know how to install linux drivers before system installation,Check following info:

HP should provide drivers for linux. You should make a smart-array 6i driver disk for linux installation.
When you boot from linux install cd ,type "linux dd" for REDHAT linux or press F6 for SUSE linux to loading smart-array 6i driver from driver disk.

NiCK
just for fun
Al_56
Regular Advisor
Solution

Re: install red-hat es3 x86 on dl360

Get the latest ISO Downloads of redhat ES 3.

They contain the new 6i drivers, as well as the latest ES 3 packages.

FYI the latest version of Redhat Es 4 is also available for download, but l'm not sure if all HP packages install cleanly on it.

l built a new DL380 G4 last weeek and the HPASM driver installed correctly after installling the latest HP SNMP package as well.

The fans are still load, even thought the HPASM interface say the fans are set to low. Are the fans louder on the new DL380's? Seems so to me.

Al