General
cancel
Showing results for 
Search instead for 
Did you mean: 

installing v2 on HP Integrity rx2600

jj21
Occasional Contributor

installing v2 on HP Integrity rx2600

hello,

i need help by installing hp-ux v2 on a HP Integrity server. I don't know how i install hp-ux. What method of cold installing is posible and where i can find the correct installing media. I have order the Mission Critical from dspp but the dvd is not bootable ?? my favourite installing method is direct installation from the DVD media. why its dosent work with a dvd install. please support me
3 REPLIES
Analyst
Trusted Contributor

Re: installing v2 on HP Integrity rx2600

Hi,

We have many options ...

please go thru'the link.

http://docs.hp.com/en/5991-5311/ch05.html

Thanks,
Analyst.
cnb
Honored Contributor

Re: installing v2 on HP Integrity rx2600

What error do you get when you try to boot the DVD?

Which v2 Release version are you using?
http://www.docs.hp.com/en/oshpux11iv2.html#Release%20Notes

Does your server meet the minimum Firmware and H/W Requirements?
http://www.docs.hp.com/en/SFWM1/ch01.html#d0e328

http://www.docs.hp.com/en/hw.html#HP%20Integrity%20rx2600%20Server


HTH,


Wim Rombauts
Honored Contributor

Re: installing v2 on HP Integrity rx2600

The installation DVD's are certainly bootable. So :
-> Your DVD is bad (never had that myself before)
-> Be sure to insert DVD 1 (I guess there are 2 of them)
-> I think an rx2600 allways comes with a DVD drive, but please check for sure it is not a CD drive. If so, you will have to replace the drive, or trequest installation CD's instead of DVD's.