HPE Community
Operating System - HP-UX
1753328 Members
4906 Online
108792 Solutions
New Discussion юеВ

Re: ioscan output

 
SOLVED
Go to solution
study unix
Regular Advisor

тАО07-01-2010 12:36 AM

тАО07-01-2010 12:36 AM

ioscan output

who can tell me the meaning to ext_bus,initiator, I really don't understand them, thanks for your support!

#ioscan
0/2/1/0 ext_bus SCSI Ultra320 A6961-60011
0/2/1/0.7 target
0/2/1/0.7.0 ctl Initiator
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО07-01-2010 12:40 AM

тАО07-01-2010 12:40 AM

Re: ioscan output

The first is a SCSI card which extends the bus, the second and third is the SCSI controller instance with SCSI ID 7.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО07-01-2010 01:06 AM

тАО07-01-2010 01:06 AM

Solution

Re: ioscan output

It's a bit old, but still good:

http://docs.hp.com/en/B2355-90053/ch01s04.html

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Reply
study unix
Regular Advisor

тАО07-01-2010 01:18 AM

тАО07-01-2010 01:18 AM

Re: ioscan output

HI
Many thanks for your support!
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.