kernel

[Indrajit Bhagat]

Hi All,

In server there are three for vmunix file in /stand file system.

How can we check which current kernel the server is using it.

[Avinash20]

To tell from which kernel booting was performed, do the following:
Using adb(1) :

o echo boot_string/S | adb /stand/vmunix /dev/kmem
Using dmesg(1M) :
If dmesg(1M) works, booting was performed from /stand/vmunix .
If dmesg(1M) does not work, run it against each kernel in /stand , until dmesg works.
When dmesg works, the kernel from which booting was performed is found. For example:

# dmesg

May 17 08:16
Magic number wrong (namelist mismatch?)
The previously mentioned example is the equivalent of:

# dmesg /dev/kmem /stand/vmunix

May 17 08:19
Magic number wrong (namelist mismatch?)

[rariasn]

He,

GSP> CL

Sample output:

ISL booting hpux -lqtest STATUS: 0
CALLER SUBACTIVITY: 1F = implementation dependent
BootRTING ENTITY TYPE: 0 = system firmware REPORTING ENTITY ID: 00
: disk(0/0/1/1.2.0.0.0.0.0;0)/stand/vmunix
10317824 + 10788864 + 421038032 start 0x201068 Data Field Unused
0x58000800800011F0 00006D01 0E100914 type 11 = Timestamp 02/14/2009 16:09:20
Type CR for next entry, - CR for previous entry, Q CR to quit.

rgs,

rariasn

[Avinash20]

"I have assigned points to 219 of 651 responses to my questions. "

Please assign points to your thread
http://forums11.itrc.hp.com/service/forums/helptips.do?#33

This is a way of saying thanks to the right answers

[Avinash20]

For 11.23 and 11.31:
It is much easier.
The following is a list of directories and their meanings that now exist with B.11.23:

Currently running kernel: /stand/current/
Copy of the current config prior to changes: /stand/backup/
Kernel config originally installed with OS /stand/last_install/
Link to the config to be used at the next boot: /stand/nextboot/
Automatically created after any crash dump: /stand/crashconfig/
There are also two special files in /stand:
/stand/vmunix is a hard link to /stand/current/vmunix
/stand/system is a soft link to /stand/nextboot/system

[Indrajit Bhagat]

Thanks for replying to all of you,
But still i am not able to get it,

I am not able to decide from which current kernel the server is running.

# cd /stand
# ls -lrt
total 227712
-r-xr-xr-x 1 bin bin 58204072 Jan 25 2006 vpmon
drwxr-xr-x 2 root root 65536 Aug 1 2006 lost+found
dr-xr-xr-x 3 bin bin 1024 Aug 1 2006 boot.sys
-r--r--r-- 1 root sys 2434 Aug 1 2006 system.import
-r--r--r-- 1 root sys 82 Aug 1 2006 kernrel
drwxr-xr-x 5 root sys 1024 Aug 1 2006 last_install
-rw-r--r-- 1 root sys 42 Aug 3 2006 bootconf
-rw-r--r-- 1 root sys 3759 Aug 16 2008 system.prev
-rwxr-xr-x 2 root sys 57994304 Aug 16 2008 vmunix
drwxr-xr-x 5 root sys 1024 Aug 16 2008 backup
drwxr-xr-x 5 root sys 1024 Aug 16 2008 current
-rw------- 1 root root 12 Aug 16 2008 rootconf
lrwxr-xr-x 1 root root 15 Aug 16 2008 system -> nextboot/system
lrwxr-xr-x 1 root root 14 Aug 16 2008 bootfs -> current/bootfs
lrwxr-xr-x 1 root root 7 Aug 16 2008 nextboot -> current
drwxr-xr-x 2 root sys 1024 Aug 16 2008 krs
-rw------- 1 root root 16464 Aug 17 2008 vpdb
-rw-r--r-- 1 root sys 24136 Oct 14 19:30 ioconfig
#

[Suraj K Sankari]

Hi,

You can use the below command to know the result

dmesg | grep boot
or
dmesg | grep -i vmunix

Suraj

[whiteknight]

Hi,

You can use kconfig with -S parameter.

See the man kconfig

-S
kconfig will display all settings of the currently running configuration that are not at their default value. In other words, it will execute

kcmodule -S

kctune -S

(If any additional kernel configuration data become available in future HP-UX releases, settings of them will be included as well.) Not valid in combination with any other flags.

hope this help.

Whiteknight

[Laurent Menase]

find /stand -name vmunix | while read a
do
echo "\n$a"; echo $a|sed -e s/./=/g
echo "linkstamp/s\nlinkstamp?s"| \
adb -o $a /dev/kmem
done >/tmp/res 2>&1

/stand/nextboot/vmunix
======================
linkstamp:
linkstamp:
Thu Sep 11 18:01:06 METDST 2008
linkstamp:
linkstamp:
Thu Sep 11 18:01:06 METDST 2008

/stand/current/vmunix
=====================
linkstamp:
linkstamp:
Thu Sep 11 18:01:06 METDST 2008
linkstamp:
linkstamp:
Thu Sep 11 18:01:06 METDST 2008

/stand/vmunix
=============
linkstamp:
linkstamp:
Thu Sep 11 18:01:06 METDST 2008
linkstamp:
linkstamp:
Thu Sep 11 18:01:06 METDST 2008

/stand/last_install/vmunix
==========================
adb: warning: Object file and memory file versions do not match ...
adb: warning: Symbol lookups may fail.
linkstamp:
linkstamp:
7à ?¡Sà >áëì¢
7à ?¡Sà >áSW^Aà ^W ^RS_^A
linkstamp:
linkstamp:
Fri Sep 10 13:59:09 EDT 2004



When the 2 linkstamp lines are matching, then it is the booted kernel.

[Indrajit Bhagat]

Hi All,

I got the exact command,

It can be find out using the following command:

#kcpath -x


Thanks for all your support.