machinfo - wron CPU information

[Dennis Handly]

>I really would like to delete the attached file as it's not the file which I meant. Could you please help me?

If this has some private info, you can make a request to the moderator by replying to this thread:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1344138

Make sure you have the URL of this thread and mention which attachment to remove.

[Torsten.]

Open a new thread here

http://forums.itrc.hp.com/service/forums/familyhome.do?familyId=295

and ask the mod for deleting.

[Yarek]

Thank you guys!

I don't have an access to the machine at this moment. I will try to get the outputs tomorrow.

regards,
Jarek

[Dennis Handly]

>Torsten: Open a new thread here

It is better to reply to an existing thread rather than create 10s of extra threads.

I probably should have the moderator delete these old ones. :-)

[Torsten.]

Sorry Dennis, of course one should add a post to this (your ;-)) thread.

[Torsten.]

Regarding the patches:

I would do something like a "patch_verify" on both vPars and run a "diff" to compare. Maybe one is missing? Same for "swlist".

[Yarek]

I've done this before (show_patches -a; swlist)
The same software, the same patches


rgds,
Jarek

[Shiv007]

Hi,

you can pull the processor information from the respective vPar through System Management Homepage

http://:2301

else

you can get the Information from MP
MP>CM>DF
select the CPU FRU.

Otherwise

try /opt/sfm/bin/CIMUtil -e root/cimv2 HP_Processor and look for the field "Description"

Thanks
Shivaprasad

[Yarek]

#kctune -q lcpu_attr
Tunable Value Expression Changes
lcpu_attr 0 0 Imm (auto disabled)

Other outputs in the attached file


regards,
Jarek

[Torsten.]

This is a bit strange ...

The other tools are reporting correctly, as far as I can see.

Could you please post a "machinfo -v" from vPar1 and vPar3?

And:

# echo "sel dev 1;info;wait;il" | cstm

(this should list all FRUs).