modem installation on HP-9000(R-Class) server.

[aique]

Hi,
I want to install an external modem on HP-9000 (R-Class) server. HP-UX 10.XX is running on it. Can any body tell me the steps to install it?

Regards,

Abdul Qayyum.

[Peter Godron]

Abdul,
use the serial connector to connect the modem.

For more detailed steps see maunal for your machine at:
http://www.docs.hp.com/en/hw.html

[aique]

thanks peter for your prompt reply. but there is no particular document for modem installation on the link you specified.

Regards,

[Steven E. Protter]

Shalom Abdul,

Once the modem is installed, you can just use sam to configure it.

sam lets you view the comands it used which will provide you a guide after the fact of a sam implementation.

SEP

[Cheryl Griffin · Accepted solution]

The instructions depend on which port you connect the modem to (Core I/O port vs. mux port, etc.)

This is for a mux port http://docs.hp.com/en/AD287-9002B/ch02s08.html

This is a good one too
http://docs.hp.com/en/B2355-90675/ch03s05.html