Operating System - HP-UX
1748169 Members
4193 Online
108758 Solutions
New Discussion юеВ

nickel did not complete its process

 
amdtaufik
Occasional Advisor

nickel did not complete its process

Hi All ...

I'm having some problem with the nickel script in one of my server, it just does not seems to complete.

I've waited for few hours its is still running. But I can see some output files generated in /tmp folder.



1st
1. Exit Nickel Session

2. Issue command:
# /sbin/init.d/diagnostic stop
# /sbin/init.d/diagnostic start

3. Run Nickel again:
# cd /opt/contrib/bin
# ./nickel


After trying the 1st steps, it was still not successfull, here was the 2nd steps taken

2nd
1. open new session
2. # ps -ef | grep nickel
# kill -9
# kill -9
Repeat above if necessary

3. The Nickel Script should continue, unfortunately it did not


Appreciate your helps and guides.

Tqvm.
2 REPLIES 2
Suraj K Sankari
Honored Contributor

Re: nickel did not complete its process

Hi,
May be some problem in your nickel script do one thing download fresh one from the below link and then try

ftp://ftp.hp.com/pub/catia/Utils/nickel.shar

Suraj
Kranti Mahmud
Honored Contributor

Re: nickel did not complete its process

Hi amdtaufik,

Your diagnostics need reinstalling, or better yet, updating. You can verify that the problem is not nickel but cstm with a simple command line like:

echo "selclass qualifier memory;info;wait;infolog" | /usr/sbin/cstm

If this command does not complete in less than 30 seconds, your diags are corrupt.

Rgds-Kranti
Dont look BACK as U will miss something INFRONT!