Operating System - Microsoft
1748157 Members
3995 Online
108758 Solutions
New Discussion юеВ

Re: "Machine is not in committed state "

 
Atekeli
New Member

"Machine is not in committed state "

After 6930p mainboard change , Notebook gives a warning message at the beginning that "Machine is not in committed state "and in bios setting the AMT Options is greyed so we cant make any changes, how can I solve this problem
14 REPLIES 14
Karl Skelton
Honored Contributor

Re: "Machine is not in committed state "

Is this a CAS issue?
Atekeli
New Member

Re: "Machine is not in committed state "

CAS issue means?
Karl Skelton
Honored Contributor

Re: "Machine is not in committed state "

you posted your question to the Client Automation Standard (CAS) forum!

Is the issue you see related to CAS software? If not, you have the wrong forum. https://community.hpe.com/t5/operating-system-microsoft/machine-is-not-in-committed-state/m-p/4621592/highlight/true#.X379yEczY2w
Atekeli
New Member

Re: "Machine is not in committed state "

My problem is to obtain "AMT Enabling tool" ,in forums I read that after using this software the warning message will be lost , Although one of the forum user gives a link for this patch , forum admin erase the link
thanks
Karl Skelton
Honored Contributor

Re: "Machine is not in committed state "

OK. still not sure if this is a CAS issue. Did you also try the HW forums?

But... what about...
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3688870&prodTypeId=321957&prodSeriesId=3688868&swLang=13&taskId=135&swEnvOID=1093
[Moderator edit: The above link is no longer valid. Please refer to https://support.hpe.com]
Under FIRMWARE...

Atekeli
New Member

Re: "Machine is not in committed state "

thanks for your interest

I use the patch but there is error message as shown below;
error (8193) Intel ME Interface :Cannot locate ME Device driver
Atekeli
New Member

Re: "Machine is not in committed state "

do you know another tool for this subject in the forum I read in another forum that there is USB tool exist and some of the problem owner solved this problem
Dennis Handly
Acclaimed Contributor

Re: "Machine is not in committed state "

Another thread with the same problem:
http://forums.itrc.hp.com/service/forums/questionanswer.do?threadId=1353092

[Moderator edit: Removed the broken links]

Kasun
Advisor

Re: "Machine is not in committed state "

After replace the motherboard you will appears this error message Machine is not in committed state "
you can remove this error msg following steps

1) Download this file using this link
http://rapidshare.com/files/358146671/AMT_brand_tool.rar.html


2) then create a bootable usb pen drive or
floppy disk and run when your booting
your note book

3) now its very easy to remove in the dos
mode,

4) in the dos mode press dir then you will
be able to see more types of tools and
exes.
5) now you can see AMT BRAND TOOL, Run this
tool ..

6) after you run this it will
automatically restart.. then you want be
able to see that error msg
thnak you..