General
cancel
Showing results for 
Search instead for 
Did you mean: 

"Machine is not in committed state "

Atekeli
Occasional Visitor

"Machine is not in committed state "

After 6930p mainboard change , Notebook gives a warning message at the beginning that "Machine is not in committed state "and in bios setting the AMT Options is greyed so we cant make any changes, how can I solve this problem
14 REPLIES
Karl Skelton
Honored Contributor

Re: "Machine is not in committed state "

Is this a CAS issue?
Atekeli
Occasional Visitor

Re: "Machine is not in committed state "

CAS issue means?
Karl Skelton
Honored Contributor

Re: "Machine is not in committed state "

you posted your question to the Client Automation Standard (CAS) forum!

Is the issue you see related to CAS software? If not, you have the wrong forum.
Atekeli
Occasional Visitor

Re: "Machine is not in committed state "

My problem is to obtain "AMT Enabling tool" ,in forums I read that after using this software the warning message will be lost , Although one of the forum user gives a link for this patch , forum admin erase the link
thanks
Karl Skelton
Honored Contributor

Re: "Machine is not in committed state "

Atekeli
Occasional Visitor

Re: "Machine is not in committed state "

thanks for your interest

I use the patch but there is error message as shown below;
error (8193) Intel ME Interface :Cannot locate ME Device driver
Atekeli
Occasional Visitor

Re: "Machine is not in committed state "

do you know another tool for this subject in the forum I read in another forum that there is USB tool exist and some of the problem owner solved this problem
Dennis Handly
Acclaimed Contributor

Re: "Machine is not in committed state "

Kasun
Advisor

Re: "Machine is not in committed state "

After replace the motherboard you will appears this error message Machine is not in committed state "
you can remove this error msg following steps

1) Download this file using this link
http://rapidshare.com/files/358146671/AMT_brand_tool.rar.html


2) then create a bootable usb pen drive or
floppy disk and run when your booting
your note book

3) now its very easy to remove in the dos
mode,

4) in the dos mode press dir then you will
be able to see more types of tools and
exes.
5) now you can see AMT BRAND TOOL, Run this
tool ..

6) after you run this it will
automatically restart.. then you want be
able to see that error msg
thnak you..
R.C.
Occasional Visitor

Re: "Machine is not in committed state "

Where can I go to get this tool? I tried the link provided, but it is no longer valid.
Kasun
Advisor

Re: "Machine is not in committed state "

hi that link has been expired this is the new link

http://www.directsoftwaredownload.com/AMTBRANDTOOL.html

thanak you
Matthias Schelle
Occasional Contributor

Re: "Machine is not in committed state "

Dear all,
is it possible to post the AMTTool again?

We have the same problem with an 8440p model after changing the motherboard.

Thank you very much in advance,
Mathew
boxman
Occasional Collector

Re: "Machine is not in committed state "

I, too, would like a link to a working tool. I've got one "machine not in a commited state."

 

I did manage to find a copy of CpqAmt Utility Version 1.0, but when I boot the program into DOS I get the command prompt message: "You must reboot the system with 'cpqamt reboot' after locking VPro configuration with one of : CPQAMT write [on, off,lock,reset]

 

I'm comfortable writing, say, an autoexec.bat file to manage the program, but I don't know what "locking VPro configuration" means, or how to do it. There are a bunch of .bat routines in the program, but I can't get any of them to help me unlock/edit/write a Vpro configuration.

 

Here is the state of this machine:

VPro uncommited

Descriptor locked

Management Engine enabled

Flash Protection Override disabled

Perry Roberts
Occasional Advisor

Re: "Machine is not in committed state "

Where is the Vpro "not in committed state" utility/tool? wndmifit tool does not resolve this? cpqamt is not for Vpro units?