cancel
Showing results for 
Search instead for 
Did you mean: 

sautil

bagek
Frequent Advisor

sautil

I have a rp4440 with a smart array 6402 controller. It reports 1 disk as failed. After replacing the drive how do I change it's status to ready? Thanks. 

1 REPLY
Robert_Jewell
Honored Contributor

Re: sautil

This info should help.I found the document via  a search, but the link is crazy.  Search for doc ID:  emr_na-c00858118-1.  The title is  Smart Array SA6400 - Integrity Server internal disk no automatic recovery".

 

Here is the info in summary:

 

Since the controller failed to detect the new disk, you may have to reset the controller:

# sautil /dev/cissX reset_ctlr   (substitue X as required)

 

Start the recovery process if needed:

# sautil /dev/cissX start_recovery

 

-Bob

 

----------------
Was this helpful? Like this post by giving me a thumbs up below!