ssh not working

[Debbie Smith]

I am using Secure_Shell 3.81.002 on hpux lli
on both systems. ssh is not working for one
user only but works fine for all others.

this is the output from ssh -v
OpenSSH_3.8, OpenSSL 0.9.7d 17 Mar 2004
HP-UX_Secure_Shell-A.03.81.002, HP_UX Secure Shell version
debug1: Reading configuration data /opt/ssh/etc/ssh_config
debug1: Connecting to shm3ts1 [15.1.27.77] port 22.
debug1: Connection established.
debug1: identity file /home/ops/.ssh/id_rsa type 1
debug1: identity file /home/ops/.ssh/id_dsa type 2
debug1: Remote protocol version 2.0, remote software version OpenSSH_3.8
debug1: match: OpenSSH_3.8 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_3.8
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: server->client aes128-cbc hmac-md5 none
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP
debug1: SSH2_MSG_KEX_DH_GEX_INIT sent
debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY
debug1: Host 'shm3ts1' is known and matches the RSA host key.
debug1: Found key in /home/ops/.ssh/known_hosts:42
debug1: ssh_rsa_verify: signature correct
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: SSH2_MSG_SERVICE_REQUEST sent
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Offering public key: /home/ops/.ssh/id_rsa
debug1: Server accepts key: pkalg ssh-rsa blen 149
debug1: read PEM private key done: type RSA
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Offering public key: /home/ops/.ssh/id_dsa
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Next authentication method: keyboard-interactive
Password:

I am not using dsa only rsa. I tried removing .ssh directory and did ssh-keygen -t rsa and using the defaults but am still having the same problem. Upgrading is not an option at this time.

[Debbie Smith]

this should be under hpux not linux
moving it to hpux