HPE Community read-only access December 15, 2018
This is a maintenance upgrade. You will be able to read articles and posts, but not post or reply.
Dec 15, 4:00 am to 10:00 am UTC
Dec 14, 10:00 pm CST to Dec 15, 4:00 am CST
Dec 14, 8:00 pm PST to Dec 15, 2:00 am PST
Showing results for 
Search instead for 
Did you mean: 

streams_sqmax parameter

dave M_3
Occasional Contributor

streams_sqmax parameter

Whats the procedure to set the streams_sqmax parameter?, i've read that i got to use the adb command but i havent been able to find how to do it.
dave M_3
Occasional Contributor

Re: streams_sqmax parameter

An oracle metalink note says that this parameter should be set using adb, i used adb to check the parameter value like this:
echo "streams_sqmax/x" |adb -n /stand/vmunix /dev/kmem
This note also says that this is not a regular kernel parameter and advises to get in contact with hp support to change it but i don't have software support with hp.
Any HP expert around here that can help me out with this?.
I forgot to say that the OS version is HPUX 11.23 IA64.