Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

syslog message

SOLVED
Go to solution
Griselda Sanchez
Frequent Advisor

syslog message

Hi, Can someone help me to understand this message on my syslog
Aug 7 21:18:51 jumtcfa1 vmunix: SCSI: Data Overrun -- lbolt: 1617447, dev: cb04
0000
Aug 7 21:18:51 jumtcfa1 vmunix: lbp->state: 60
Aug 7 21:18:51 jumtcfa1 vmunix: lbp->offset: ffffffff
Aug 7 21:18:51 jumtcfa1 vmunix: lbp->uPhysScript: f8f6e000
Aug 7 21:18:51 jumtcfa1 vmunix: From most recent interrupt:
Aug 7 21:18:51 jumtcfa1 vmunix: ISTAT: 0a, SIST0: c0, SIST1: 00,
DSTAT: 80, DSPS: f8f6e5c1
Aug 7 21:18:51 jumtcfa1 vmunix: lsp: 000000004a9e0500
Aug 7 21:18:51 jumtcfa1 vmunix: bp->b_dev: cb040000
Aug 7 21:18:51 jumtcfa1 vmunix: scb->io_id: 40004be
Aug 7 21:18:51 jumtcfa1 vmunix: scb->cdb: 12 00 00 00 ff 00
Aug 7 21:18:51 jumtcfa1 vmunix: lbolt_at_timeout: 0, lbolt_at_st
art: 0
Aug 7 21:18:51 jumtcfa1 vmunix: lsp->state: 5
Aug 7 21:18:51 jumtcfa1 vmunix: lbp->owner: 0000000000000000
Aug 7 21:18:51 jumtcfa1 vmunix: scratch_lsp: 000000004a9e0500
Aug 7 21:18:51 jumtcfa1 vmunix: Pre-DSP script dump [fffffffff8f6e348]:
Aug 7 21:18:51 jumtcfa1 vmunix: 60000008 00000000 60000040 00000
000
Aug 7 21:18:51 jumtcfa1 vmunix: 0f000000 f8f6e5c1 98080000 00000
007
Aug 7 21:18:51 jumtcfa1 vmunix: Script dump [fffffffff8f6e368]:
Aug 7 21:18:51 jumtcfa1 vmunix: 0f000001 f8f6e5c1 80840000 fffff
ea8
Aug 7 21:18:51 jumtcfa1 vmunix: 7c027f00 00000000 60000040 00000
000
Aug 7 21:18:51 jumtcfa1 vmunix: lsp->puScript [0000000044084000]:
Aug 7 21:18:51 jumtcfa1 vmunix: 0900002b 00b08180 e25c0004 f8f6e


Thanks
4 REPLIES
Helen French
Honored Contributor
Solution

Re: syslog message

Look like an error with your backup tape device. Check the drive/device connected to controller 4 with SCSI target 0 (c4t0d0?) and make sure it's working okay. If you can't find any problem with the hardware, try applying the latest SCSI I/O cumulative patches.
Life is a promise, fulfill it!
Griselda Sanchez
Frequent Advisor

Re: syslog message

On the message where did you see the Controler 4 , target and Lun??
thanks
Colin Topliss
Esteemed Contributor

Re: syslog message

The line:

Aug 7 21:18:51 jumtcfa1 vmunix: bp->b_dev: cb040000

where:

cb = device type (do an lsdev to see).
04 = controller
0 = target
0 = disk

Remember that the values are in hex.

Colin.
generic_1
Respected Contributor

Re: syslog message

Look at that disk in stm or cstm and see if you see problems with it. It may need replaced. Hopefully your drives are mirrored or raid protected.