General
cancel
Showing results for 
Search instead for 
Did you mean: 

terminal emulation using hyper terminal

SOLVED
Go to solution
Rommel T. Misa_2
Frequent Advisor

terminal emulation using hyper terminal

I'm trying to install hp-ux using a laptop as my terminal. I'm using the hyper terminal console emulation. When the system prompts me for my terminal type, at first I chose hp but the screen was muddled. I also tried vt100 but same result. Has anybody tried this successfully? What setting did you use? Hope you can help.

Thanks,
ROMMEL
2 REPLIES
Robert-Jan Goossens
Honored Contributor
Solution

Re: terminal emulation using hyper terminal

Hi Rommel,

These are the settings I use for hyperterminal/putty

Speed (baud) 9600
Data bits 8
Stop bits 1
Parity None
Flow control XON/XOFF

I you select the session in hyperterminal, click file, properties and settings, change the terminal type to VT100.

Hope this helps,
Robert-Jan
Torsten.
Acclaimed Contributor

Re: terminal emulation using hyper terminal

The default of hyperterminal is auto detect and ansi - most of the time the reason for problems. Set it to vt100 via the properties window or even better - use putty.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!