HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

About RP5470's front panel light

SOLVED
Go to solution
Jinghan
Occasional Advisor

About RP5470's front panel light

Hey,guys
I have qutstion about RP5470's front panel light.The light of attention & remote now is show orange color.How should i to check the server is fine,and can let the orange light disable?
5 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: About RP5470's front panel light

Remote amber means remote is enabled.
Attention amber means there is a message in GSP log. Read it and the LED will go off.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Johnson Punniyalingam
Honored Contributor

Re: About RP5470's front panel light

Login to Console



MP>sl -> show logs , type e looks for errors once your go through logs, attention light will be gone.

MP>he -> help
MP>lis -> list all the options or command
Problems are common to all, but attitude makes the difference
Torsten.
Acclaimed Contributor

Re: About RP5470's front panel light

As said, use the "sl" command:

GSP> he li


HE LI


==== GSP Help ============================================(Administrator)===
AC : Alert display Configuration PC : Remote Power Control
AR : Automatic System Restart config. PG : PaGing parameter setup
CA : Configure asynch/serial ports PS : Power management module Status
CL : Console Log- view console history RS : Reset System through RST signal
CO : COnsole- return to console mode SDM : Set Display Mode (hex or text)
CSP : Connect to remote Service Proc. SE : SEssion- log into the system
DC : Default Configuration SL : Show Logs (chassis code buffer)
DI : DIsconnect remote or LAN console SO : Security options & access control
EL : Enable/disable LAN access SS : System Status of proc. modules
ER : Enable/disable Remote/modem TC : Reset via Transfer of Control
HE : Display HElp for menu or command TE : TEll- send a msg. to other users
IT : Inactivity Timeout settings VFP : Virtual Front Panel display
LC : LAN configuration WHO : Display connected GSP users
LS : LAN Status XD : Diagnostics and/or Reset of GSP
MR : Modem Reset XU : Upgrade the GSP Firmware
MS : Modem Status

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Jinghan
Occasional Advisor

Re: About RP5470's front panel light

Thank you,Guys
After i reset GSP,and view the GSP log,This problem is solved...
Jinghan
Occasional Advisor

Re: About RP5470's front panel light

Thank you,Guys
After i reset GSP,and view the GSP log,This problem is solved...