Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

C1099A Terminal not funtion.

stephen peng
Valued Contributor

C1099A Terminal not funtion.

dear all,
i've got a C1099A Terminal funtion problem. when i connect the terminal to the server(like superdome)'s console port, the "GSP login:" prompt appears, after i input the username Admin and press enter, it does not show the "GSP password" prompt, it means i could not enter the password Admin to access GSP, so i could not log on to os via that terminal. but when i use a hyperterm of a laptop, it does funtion ok.
so what configuration of the terminal i should modify to make it function ok?

thanks a lot.
3 REPLIES
Suraj K Sankari
Honored Contributor

Re: C1099A Terminal not funtion.

Hi,

Terminal or a PC running a terminal emulator to the console serial port settings should 9600 Baud, 8-bits, No-parity, 1 Stop bit.

Suarj
stephen peng
Valued Contributor

Re: C1099A Terminal not funtion.

Sankari,
i know about that port setting. would these setting cause the terminal not function ok?
Suraj K Sankari
Honored Contributor

Re: C1099A Terminal not funtion.

>>would these setting cause the terminal not function ok?

Yes Sir, If terminal setting is not proper then charecter will not properly seen on the screen.

Suraj