CPU Type, Speed

[arkie]

Hi,

Request help with how to gather the CPU type, speed, FRU info, memory info, etc. from the rp4440, rp3440 & rp3410 PA-RISC based systems running HP-UX B.11.11.

I am unable to locate these info from the cstm output. What does the "Hardware Model: 0x894" under "Information Tool Log for CPU" signify?

One cstm output of a rp4440 system is attached herewith

[Robert-Jan Goossens]

Hi,

Try the machinfo command.

# /usr/contrib/bin/machinfo

Regards,
Robert-Jan

[arkie]

I tried '/usr/contrib/bin/machinfo' but system is saying :not found. Sorry, forgot to mention HP-UX version is B.11.11

I was trying with 'cstm' but the UI is not starting up properly, and I cant select anything - says the same is disabled.

[Robert-Jan Goossens]

try this (borrowed from Merijn http://mirrors.develooper.com/hpux/faq.html )

# perl -MUnix::Processors -le'print join"\t",$_->id,$_->state,$_->type,$_->clock for @{Unix::Processors->new()->processors}'

[arkie]

Can't locate Unix/Processors.pm in @INC (@INC contains: /opt/perl/lib/5.8.3/PA-RISC1.1-thread-multi /opt/perl/lib/5.8.3 /opt/perl/lib/site_perl/5.8.3/PA-RISC1.1-thread-multi /opt/perl/lib/site_perl/5.8.3 /opt/perl/lib/site_perl .).
BEGIN failed--compilation aborted.

[Robert-Jan Goossens]

Ignite installed?

# /opt/ignite/bin/print_manifest

[arkie]

yes, installed.d Pls find the output attached

[Robert_Jewell]

Support Tools will give you the info your looking for. Run it like this to create a single text log file to view:

# echo "selall;info;wait;infolog;view;done" | /usr/sbin/cstm > /tmp/info.log

View the /tmp/info.log file.

If you dont have STM installed, download it from HP from here:

https://h20293.www2.hp.com/portal/swdepot/try.do?productNumber=B6191AAE

-Bob

[Robert_Jewell · Accepted solution]

OK, sorry I hadnt realized you provided that info with your original post.

Memory info can be obtained from STM, but at times CPU details are vague. You can get more info from the MP of the server though. Access the MP from the console (or telnet to the MP LAN if configured). From the MP Command Menu run DF. Specify Processor RAM and CPU PIROM to see details on the processor.

-Bob

[Torsten.]

From your cstm output:

CPU model: PA 8900

A newer version will also report the speed.

Your version is from 2005!!!


http://h20293.www2.hp.com/portal/swdepot/displayProductInfo.do?productNumber=B6191AAE