Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Change IP Address on HP979-DTC

Scott Banken
Occasional Visitor

Change IP Address on HP979-DTC

How do I change the IP address on the HP979-DTC server attached to my HP3000? Thanks!
2 REPLIES
Eric Sorensen_1
Honored Contributor

Re: Change IP Address on HP979-DTC

Hello Scott,

Normally, the DTC IP address is not set when the DTC is used by the 3000 (it finds the DTC by nodename), but you can set/change the IP in NMMGR's DTC configuration screen (field label: DTC IP Address).
A problem well defined is half solved.
Kwan Fong, Emile
Honored Contributor

Re: Change IP Address on HP979-DTC

Hi Scott,

Additional note to Eric's one: if your DTCs are managed by a PC running OpenView DTCMGR software, then the DTCs IP address is changed within the DTCMGR software, and not on the e3000 server.
King is the customer!