HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Configure L2000 for lan console

SOLVED
Go to solution
frederick hannah
Super Advisor

Configure L2000 for lan console

I have an l2000 server running HPUX 11.0 and I would like to access the box via lan console. Does anyone know if the l2000 came lan-console ready? I am unable to find port 0/0/0 although lanscan displays such a port.
3 REPLIES
Tim Nelson
Honored Contributor
Solution

Re: Configure L2000 for lan console

When you say LAN console I assume you mean, MP / ILO ?

If so you will never see that hw via the OS.

To configure, attach serial cable to MP/ILO and putty or hyperterminal setup for serial connection.

Once access is gained use the cm > lc command to configure the IP on the lan port.

Once the MP/ILO is up on the network you can either use, http or telnet to access.

frederick hannah
Super Advisor

Re: Configure L2000 for lan console

thanks, you have given me some ideas I hadnt thought of.
frederick hannah
Super Advisor

Re: Configure L2000 for lan console

Solution found.