HPE 9000 and HPE e3000 Servers
1748195 Members
2677 Online
108759 Solutions
New Discussion юеВ

Re: Configure UPS on RP5470

 
SOLVED
Go to solution
Steve Kunzman
Occasional Contributor

Configure UPS on RP5470

We had a APC Powerchute UPS on the RP5470, but now we want to use the HP PowerTrust (A2997A) from our old K210. We have physically connected the UPS power and cable to the mux, but it is not recognized.

What do I need to do?

Thank you.
4 REPLIES 4
Torsten.
Acclaimed Contributor
Solution

Re: Configure UPS on RP5470

The powertrust will be monitored by ups_mond. Ensure to configure the correct port, use the correct cable and enable the daemon in inittab file.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: Configure UPS on RP5470

... I forgot to say, depending on your GSP firmware you probably need to patch your OS.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Viveki
Trusted Contributor

Re: Configure UPS on RP5470

The following document says your requirements:
http://docs.hp.com/en/B2355-90698/ch09s02.html#upst

The below link has the configuration instruction:
http://docs.hp.com/en/B2355-90698/ch09s03.html
Torsten.
Acclaimed Contributor

Re: Configure UPS on RP5470

The UPS cable needs to connect to the UPS cable of the GSP!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!