HPE Community
HPE 9000 and HPE e3000 Servers
1752664 Members
5863 Online
108788 Solutions
New Discussion

Re: Connect DTC 72 MX with hp e3000( A500 serveur)

 
Stephen Coll
Occasional Advisor

‎01-29-2003 07:23 AM

‎01-29-2003 07:23 AM

Connect DTC 72 MX with hp e3000( A500 serveur)

hello,

we have installed a new server HP e3000 ( A500 class )with MPE 7.5 .
we have problems to configure DTC in mmgr ,so what is the dtslink path to use and where should be the network port to be used ?
is it the system lan with path 0/0/0/0 or the gsp Lan console.

when we set the dtslink to the path 0/0/0/0,the system hung ( with error path message ).

we have never configure the DTC in A500 class .

thank you .

rti
0 Kudos
1 REPLY 1
paul courry
Honored Contributor

‎01-29-2003 01:59 PM

‎01-29-2003 01:59 PM

Re: Connect DTC 72 MX with hp e3000( A500 serveur)

Go check your post in MPE/ix, I put the answer there.
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.