Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

GSP Access on rp 2470

SOLVED
Go to solution
Grayh
Trusted Contributor

GSP Access on rp 2470

Hi All,

I do not have telnet access to the GSP on the rp2470... nor do I have the IP address for it... I do not know if an Ip has been configured for it.

Now I would like to access the GSP also remotely say from telnet or ssh.

How should I proceed...

Thank you
2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: GSP Access on rp 2470

Connect via serial line, get the lan information.

GSP> ls

configure if needed

GSP> lc

set up a user, if not already done, see

http://forums11.itrc.hp.com/service/forums/questionanswer.do?threadId=1270620


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Grayh
Trusted Contributor

Re: GSP Access on rp 2470

thank u