GSP(gardian service processor)

[KCS_1]

Hi~ all.

(HPUX11.0,rp5450).

I know that enter GSP mode when press ctrl+B on system console.
anyway,how to see GSP firmware on GSP mode?
can you give me that?
thanks!!

[Michael Tully · Accepted solution]

To see the GSP firmware revision:

Control B on the console.

GSP> he

==== GSP Help =====
Hardware Revision 8 Firmware Revision A.01.09

GSP help:> li (list of info)

> XU (shows how the firmware can be upgraded)

[Scott Van Kalken]

he shows the version.

To upgrade the firmware, you use the XU command, as Michael has mentioned.

To upgrade, you need an ftp server on the same subnet.

This can be via a crossover cable or whatever, but it's a pain to do.

Scott.

[eric watson]

FYI: If you are looking to see if your firmware is current, the current versions for your system are A.01.10 if you have a revision A GSP and B.02.07 for a revision B GSP.

There will be a new revision B GSP firmware by the end of the month for the rp5450. The revision number is B.02.13 and it will be located on the ITRC at http://itrc.hp.com/.

The patch name will be PF_CCANGSPB0213 and you will also need the following OS patches, when they become available.

For OS 11.0
Console Driver PHNE_27393
insf PHCO_27370