HDD firmware

[Shelley Zhou]

Hello,
We have an HP9000/rp4440 server which has two internal disks ST373454LC with firmware HPC3. According to the Customer Notice document c00776070, it's recommended to upgrade the firmware.
I have searched in HP website but havn't found any firmware for it.
Could you advice me where to get the lastest firmware for the HDD and how can I verify if the firmware we are using is the latest one?

Following is the output form STM:

-- Information Tool Logfor SCSI Disk on path 0/1/1/0.1.0 --
Log creation time: Fri Nov 21 09:24:48 2008
Hardware path: 0/1/1/0.1.0
ProductId: ST373454LC Vendor:HP 73.4G
Device Type: SCSI Disk Firmware Rev: HPC3
Device Qualifier: HP73.4GST373454LC Logical Unit: 0
Serial Number: 3KP0PNFS00007548L1PT
Capacity (M Byte): 70007.20Block Size:512Max Block Address: 143374737

P.S. This thread has been moevd from Disk to Servers > HP 9000. - Hp forum Moderator

[Ivan Krastev]

Use diskinfo:

diskinfo -v /dev/rdsk/c2t1d0 | grep rev
rev level: HPC1


regards,
ivan

[Víctor Cespón]

Disk firmware downloads here:

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=316183&prodTypeId=12169&prodSeriesId=316169&swLang=13&taskId=135&swEnvOID=54

Integrity Server Embedded Disk Products
21 Feb 2008
It contains ST373454LCHPC3.nsh