HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 (3410) Internal Fan Falied

M Faraz Rehan
Occasional Visitor

HP 9000 (3410) Internal Fan Falied

Hi there,
Im new to HP can sombody guide me as below:
I need Part # for replacemnet as per below log form ILO



Log Entry 20: 05 Apr 2011 09:45:36
Alert Level 7: Fatal
Keyword: Type-02 076f03 487171
No events were received from system firmware
Logged by: Baseboard Management Controller;
Sensor: Processor
Data1: FRB2/Hang in POST failure
0x204D9AE4C0020150 FFFF036F00070300


Log Entry 19: 05 Apr 2011 09:44:02
Alert Level 3: Warning
Keyword: Type-02 0a0701 657153
Cooling unit warning
Logged by: Baseboard Management Controller;
Sensor: Cooling Device - Cooling 1 (Sys)
Data1: transition to Non-Critical from OK
0x204D9AE462020140 FFFF0107110A0300


MP:SL (+,-,,D, F, L, J, H, K, T, A, U, ? for Help, Q or Ctrl-B to Quit) >



Log Entry 18: 05 Apr 2011 09:44:01
Alert Level 3: Warning
Keyword: Type-02 040601 263681
Fan speed lags
Logged by: Baseboard Management Controller;
Sensor: Fan - Fan CPU0 (R)
Data1: Performance Lags
0x204D9AE461020130 FFFF0106EA040300


Log Entry 17: 05 Apr 2011 09:43:38
Alert Level 2: Informational
Keyword: Type-02 040600 263680
Fan Performance OK
Logged by: Baseboard Management Controller;
Sensor: Fan - Fan CPU0 (R)
Data1: Performance Met
0x204D9AE44A020120 FFFF0006EA040300

2 REPLIES
Torsten.
Acclaimed Contributor

Re: HP 9000 (3410) Internal Fan Falied

Looks like the fan on top of the CPU is running too slow.


From MP post

MP:CM> ps

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
KSamuel
Visitor

Re: HP 9000 (3410) Internal Fan Falied

For people who still got this problem, try to check your firmware, if too low you should downgrade your CPU and upgrade it before put higher CPU

 

:)