HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 B2600 CD-ROM ISSUE

HP RX4640
Frequent Advisor

HP 9000 B2600 CD-ROM ISSUE

I have an issue.. the machine is showing a hardware failure for the CD the CD was replaced and still having the same issue.

" ENTRY_INIT failed, status = -4: Ubrecoverable hardware error"
4 REPLIES
Torsten.
Acclaimed Contributor

Re: HP 9000 B2600 CD-ROM ISSUE

Looks like you receive this during boot. What CD is inside?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HP RX4640
Frequent Advisor

Re: HP 9000 B2600 CD-ROM ISSUE

they were trying to load AdvaCommand 1.8/6 for UNIX.

Did an "sea" bo p0 for CD
Torsten.
Acclaimed Contributor

Re: HP 9000 B2600 CD-ROM ISSUE

I assume this message appears when you try to boot from this CD, but it is likely not bootable. If the boot fails, the system suggests a hardware error.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
HP RX4640
Frequent Advisor

Re: HP 9000 B2600 CD-ROM ISSUE

Will try loading another CD then. I personally have never received the error message on any 9000 server or workstation so I thought right of the bat it was a hardware issue with the motherboard.