Simpler Navigation for Servers and Operating Systems
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 D330 SERVER GIVING DUMP ERROR - panic trap type 1 (HPMC),

AhamedAliRaja
Occasional Visitor

HP 9000 D330 SERVER GIVING DUMP ERROR - panic trap type 1 (HPMC),

Pl help on this.

 

panic trap type 1 (HPMC),  pcsq.pcoq = 0.aded8, isr.ior = 0.1000445

 

Below is attached q4 trace Event Output:


q4> trace event 0
stack trace for event 0
crash event was an HPMC
mux2_poll+0xf8
ttisr_daemon+0x120
main+0x66c
$vstart+0x34

 

shutdown Log:

 

17:34 Wed Dec 10, 2014. Halt: (by orient!root)

17:41 Wed Dec 10 2014. Reboot after panic: trap type 1 (HPMC), pcsq.pcoq = 0.aded8, isr.ior = 0.1000445

18:14 Wed Dec 10, 2014. Halt: (by orient!root)

11:50 Thu Dec 11 2014. Reboot after panic: trap type 1 (HPMC), pcsq.pcoq = 0.11057c, isr.ior = 0.d37d20

 

cat /var/adm/crash/core.17/INDEX  Log:

 

comment   savecore core dump INDEX file

hostname orient

modelname 9000/813/D330

panic     trap type 1 (HPMC), pcsq.pcoq = 0.11057c, isr.ior = 0.d37d20

dumptime Thu Dec 11 11:35:00 IST 2014

savetime Thu Dec 11 11:49:14 IST 2014

release   @(#)9245XB HP-UX (B.10.20) #1: Sun Jun 9 06:31:19 PDT 1996

 

memsize   134217728

chunksize 16777216

module   /stand/vmunix vmunix 0x0000000000000000 0x0000000000000000 7391632 3807183718

chunk     0x0000000000000000 0x0000000001000000 core.17.1 3588338658

chunk     0x0000000001000000 0x0000000001000000 core.17.2 3279517532

chunk     0x0000000002000000 0x0000000001000000 core.17.3 303620999

error     savecore: Insufficient space to save full core dump

warning   savecore: only 54525952 of 134217728 bytes saved.

chunk     0x0000000003000000 0x000000000039d71c core.17.4 3630149701

 

 

P.S. This thread has been moved from HP-UX > System Administration to HP 9000. - Hp forum Moderator

2 REPLIES
Bill Hassell
Honored Contributor

Re: HP 9000 D330 SERVER GIVING DUMP ERROR - panic trap type 1 (HPMC),

The HPMC (High Priority Machine Check) indication means that a hardware failure has occured. Could be the system board, possibly an I/O card). You'll need to contact HP service to fix the problem.



Bill Hassell, sysadmin
Robert_Jewell
Honored Contributor

Re: HP 9000 D330 SERVER GIVING DUMP ERROR - panic trap type 1 (HPMC),

Its been 3 weeks, but if you are still having a problem you can do the following.

 

Locate the file /var/tombstones/ts99

 

-- or --

 

Reboot and interrupt the boot process.  Issue the command as follows and capture the ouptut to a  file:

 

> SER PIM

 

 

Attach either of the above to this post.   The D class PIM codes were not overly difficult to review, so maybe we can assist.

 

-Bob

 

 

----------------
Was this helpful? Like this post by giving me a thumbs up below!