HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 K420 Powerdown and Startup

SOLVED
Go to solution
chris_gillett76
Occasional Visitor

HP 9000 K420 Powerdown and Startup

Hi guys,

Looking for any help possible on this.  Tonight we need to power down a HP9000 K420 and a K370.  We don;t have anyone in the organisation that has any knowledge of these servers.  I'm looking for anyone who can give me some advice on the shutdown process.  I'm assuming:

1. UNIX team shutdown UNIX OS - I assume my team know how to do this but if someone can confirm command
2. On the fron of the server turn the 'Key' to 'Standby'
3. Remove power cable from server
4. Using power button on front shutdown HP Storage Enclosures
5. Remove power from HP Storage Enclosures


Start-up
1. Insert powercables into HP Storage Enclosures
2. Switch on HP Storage Enclosures using power button on front (wait 10 minutes)
3. Insert power cable into HP K9000
4. Turn key on HP K9000 to On

Should that now boot?

Any advise would be amazing!

Chris

4. Using power button on front shutdown

 

 

 

 

 

 

 

 

2 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: HP 9000 K420 Powerdown and Startup

do a

shutdown - h 0

steps are ok.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
chris_gillett76
Occasional Visitor

Re: HP 9000 K420 Powerdown and Startup

Thanks Torsten