HPE 9000 and HPE e3000 Servers
1748125 Members
3044 Online
108758 Solutions
New Discussion юеВ

Re: HP 9000 RP3410 GRAPHICS CARD ISSUE

 
HP RX4640
Frequent Advisor

HP 9000 RP3410 GRAPHICS CARD ISSUE

I put a graphics card in in my rp3410 and am having problems getting it to come up it only come up while I am on the console / serial but has no function. How do I set the VGA graphics to my primary connection?
3 REPLIES 3
Andrew Rutter
Honored Contributor

Re: HP 9000 RP3410 GRAPHICS CARD ISSUE

hi jim,

first did you install the USB card, seem to remember you need this too.

but, it will only work as a graphics card when in hpux. you can change the system console path to the graphics card at BCH, but you wont actually see any output as it boots until it finally gets to CDE/Xwindows.

Andy
HP RX4640
Frequent Advisor

Re: HP 9000 RP3410 GRAPHICS CARD ISSUE

The rp3410 dosn't use the USB card it has standard USB ports that you are supposed to use. I went into SAM and tried to set the VGA card as defualt with still no luck :( Am I missing something?
Andrew Rutter
Honored Contributor

Re: HP 9000 RP3410 GRAPHICS CARD ISSUE

Jim,

what slot is the card in?

it should be in either slot 1 or 2(the top two slots on the rp3410)

is the card seen at PDC in the io menu? or seen in unix with ioscan?

Andy