Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

HP 9000 rp3440 iLO MP GUI access

SOLVED
Go to solution
Phillip Popp
Regular Advisor

HP 9000 rp3440 iLO MP GUI access

Hi,
I have a iLO MP I just got on the network. not familiar with iLO MP at all. Telnet works great but I would like to use the web interface.

when I type in the ip address it finds the MP and tries to load the images but I just get a image square that did not load properly. I have tried internet explorer and Firefox and get the same results.

I have the telnet and web interface enabled?

any ideas would surly be appreciated.


MP firmware is E.02.10

Thanks,

Phil

1 REPLY
Andrew Rutter
Honored Contributor
Solution

Re: HP 9000 rp3440 iLO MP GUI access

hi,

the ILO is heavily dependent upon java applets and so on, so i would check this out.

but first you need to update the MP firmware version to E.03.13 minimum

see page 14
http://www.filibeto.org/unix/hp-ux/lib/hardware/systems/a500/5971-4274_iLO_ops.pdf

also this threasd if you havent already

http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1276945742787+28353475&threadId=1228347

Andy