Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

HP rp5430

SOLVED
Go to solution
Sakhile
Occasional Contributor

HP rp5430

Hello

I have a HP rp5430 server. I unfortunately do not have any unix knowledge. Can someone explain to me in detail the simplest way to check how much memory is installed and in which slots as we are considering upgrading memory ? I want to check this information without any downtime or interruption to the users. Thanks in advance
2 REPLIES
Matti_Kurkela
Honored Contributor
Solution

Re: HP rp5430

You should have the STM diagnostics installed (it's available on your installation CD/DVD kit).

Type the following command as root, all on one line:

echo "selclass type memory; info; wait; infolog" | /usr/sbin/cstm

This command can be executed at any time: it does not cause any downtime or interruption.

The output should contain a "Memory Board Inventory". It is a table that lists each memory DIMM by location.

If I recall correctly, a rp5430 will have only one memory extender (EXT 0) and it has a total of eight DIMM slots. The slots must be filled in pairs, so they're identified as 0a/0b, 1a/1b, 2a/2b and 3a/3b.

The maximum memory configuration for model rp5430 is 8 GB.

The hardware is capable of using 16 GB, but to get that, you would have to get a "lockword upgrade" that modifies the model number of your current hardware to rp5470 and enables the second memory extender slot, 2 CPU sockets (to allow a maximum of 4 CPUs total) and a few PCI slots.

MK
MK
Sandeep_Chaudhary
Trusted Contributor

Re: HP rp5430

echo "selclass qualifier memory; info; wait; infolog" | /usr/sbin/cstm

OR "dmesg|grep -i phy"

OR "top"

OR use "glance" command if u have it installaed. press M to get memory information.