HPE 9000 and HPE e3000 Servers
1748180 Members
4225 Online
108759 Solutions
New Discussion юеВ

HP server booting problem

 
Bineesh MS
New Member

HP server booting problem

Dear HP folks,

H/W : HP 9000 D 320
OS : HP-Ux 11.0

Sever connected to 2 no of storage boxes (hcl-hp & hp rack enclosure A3312A )

Tried to boot the server by disconnecting the storage boxes .Now the server booted and worked fine for 1 hr period and again rebooted

Below error generated on crash dump
"crash event was an HPMC"

Please verify the attached logs and suggest the solution

Regards,
Bineesh MS

8 REPLIES 8
Sunil Sheoran
Frequent Advisor

Re: HP server booting problem

Hi

HPMC is normally in case of some hardware fialure.

Sunil
Bineesh MS
New Member

Re: HP server booting problem

Dear,

Please let me know the Root cause (How to find out the exact hardware)

Regards,
Bineesh MS
rariasn
Honored Contributor

Re: HP server booting problem

Hi,

The HPMC type codes are;

503F - Bus Error
7000 - Memory Double Bit Error
2040 - Data Cache Parity Error

Open call service

rgs,
Bineesh MS
New Member

Re: HP server booting problem

Yeah, got one HPMC 503f finside PIM

what will be the suppected hardware?
Bineesh MS
New Member

Re: HP server booting problem

Yeah, got one HPMC 503f inside PIM

what will be the suppected hardware?
Bineesh MS
New Member

Re: HP server booting problem

Yeah, got one HPMC 503 finside PIM

what will be the suppected hardware?
Michael Steele_2
Honored Contributor

Re: HP server booting problem

5=BUS Transactions
0=Slot number
3=Bus Number
F=A fault on the IO Adaptor

So, I suspect that the HSC (NOT EISA) IO card installed in slot 0 has a problem.
Worst case is that the System Backplane has an issue.
Support Fatherhood - Stop Family Law
SoorajCleris
Honored Contributor

Re: HP server booting problem

Hi,

tape 1 20/5/4.1.0 stape CLAIMED DEVICE HP C1533A
/dev/rmt/1m /dev/rmt/c3t1d0DDS
/dev/rmt/c3t1d0BEST /dev/rmt/c3t1d0DDSb
/dev/rmt/c3t1d0BESTb /dev/rmt/c3t1d0DDSn
/dev/rmt/c3t1d0BESTn /dev/rmt/c3t1d0DDSnb
/dev/rmt/c3t1d0BESTnb
target 6 20/5/4.2 tgt CLAIMED DEVICE
disk 5 20/5/4.2.0 sdisk CLAIMED DEVICE SEAGATE ST32272N
/dev/dsk/c3t2d0 /dev/rdsk/c3t2d0
target 7 20/5/4.3 tgt CLAIMED DEVICE
disk 6 20/5/4.3.0 sdisk CLAIMED DEVICE SEAGATE ST32550N
/dev/dsk/c3t3d0 /dev/rdsk/c3t3d0
target 8 20/5/4.4 tgt CLAIMED DEVICE
disk 7 20/5/4.4.0 sdisk CLAIMED DEVICE SEAGATE ST32550N
/dev/dsk/c3t4d0 /dev/rdsk/c3t4d0



you have connected the TAPE and Disk on the same bus !!!!
"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity" - Dennis Ritchie