Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to Redirect Output to Graphics Monitor

glennes
Frequent Advisor

How to Redirect Output to Graphics Monitor

On an HP 9000 K370, how do I redirect output to the graphics monitor?

 

I have a Visualize-EG Graphics Card in the machine and want to redirect system output to it.

 

(Currently, output is directed to the console.)

 

The graphics monitor is at 8/12.0 on this machine.

 

Do I type:

 

pa con 8/12.0

 

to do this? Or, if not, what is the correct way to do it?

 

Also, if I want to again redirect output to the terminal console at 10/8.0 how do I tell the system to redirect output to the console terminal?

 

I have discovered that if I redirect output to the wrong port/address, I can depress the TOC button after disconnecting the graphics monitor/keyboard/mouse and the system will default back to the terminal console. Is this the correct way to do it?

 

Thanks!

 

Glenn