Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

How to dump all SL logs in GSP

n00body
Advisor

How to dump all SL logs in GSP

I'm achieving all SL logs in GSP to be submitted to HP . But it requires manual input '+ CR' to display all logs . Is there any way that I could dump all logs into the screen and i could capture it via putty logging for instance .

GSP Host Name: test-gsp
GSP> SL


SL

Select Chassis Code Buffer to be displayed:
Incoming, Activity, Error, Current boot or Last boot? (I/A/E/C/L) E
E

Set up filter options on this buffer? (Y/[N]) N
N

The first entry is the most recent Chassis Code
Type + CR and CR to go up (back in time),
Type - CR and CR to go down (forward in time),
Type Q/q CR to quit.


Log Entry # 0 :
SYSTEM NAME: test-gsp
DATE: 08/08/2009 TIME: 22:12:36
ALERT LEVEL: 5 = Boot possible, environmental problem exists

SOURCE: 6 = platform
SOURCE DETAIL: 1 = cabinet SOURCE ID: 0
PROBLEM DETAIL: 1 = inlet overtemp

CALLER ACTIVITY: E = system warning STATUS: 0
CALLER SUBACTIVITY: 00 = implementation dependent
REPORTING ENTITY TYPE: E = HP-UX REPORTING ENTITY ID: 00

0x00E000516100E000 00000000 00000000 type 0 = Data Field Unused
0x58E008516100E000 00006D07 08160C24 type 11 = Timestamp 08/08/2009 22:12:36
Type CR for next entry, Q CR to quit.
+ CR


Log Entry # 1 :
SYSTEM NAME: test-gsp
ALERT LEVEL: 8 = Boot Possible, performance impaired

SOURCE: 6 = platform
SOURCE DETAIL: 6 = service processor SOURCE ID: 0
PROBLEM DETAIL: 1 = selftest result

CALLER ACTIVITY: 2 = operation STATUS: 0
CALLER SUBACTIVITY: 03 = console
REPORTING ENTITY TYPE: 1 = service processor REPORTING ENTITY ID: 00

0x7010028166002030 01010000 003D0002 type 14 = Problem Detail
0x4810028166002030 72727570 496E7465 type 9 = ASCII Message Interrup
0x4810028166002030 72762E43 49326344 type 9 = ASCII Message I2cDrv.C
0x7010028166002030 00000000 000007E5 type 14 = Problem Detail
0x70100A8166002030 00000000 00000000 type 14 = Problem Detail
Type CR for next entry, - CR for previous entry, Q CR to quit.

any advice , gurus ?
5 REPLIES
Viveki
Trusted Contributor

Re: How to dump all SL logs in GSP

Hi,

There is no way to dump all logs in GSP as like MP. You have to keep pressing enter key to collect all the possible logs
Raj D.
Honored Contributor

Re: How to dump all SL logs in GSP

n00body,

Perhaps in GSP there is not much facility to save log or dumps, you can save it from putty log capture:

In Putty --> go to Logging --> All Session output --> GSP-SL-Log.txt

Open the putty session --> connecto to GSP-->

In GSP , while in SL -->
Type CR for next entry, Q CR to quit

Press Carriage Return untill you reach to the end of the log.



Once you reached end of the log quit, GSP ad check the file GSP-SL-Log.txt (Remove unwanted entry ) and thats your GSP SL log.


Cheers,
Raj.




* Dont forget to assign points at the end.


" If u think u can , If u think u cannot , - You are always Right . "
n00body
Advisor

Re: How to dump all SL logs in GSP

Hi Raj ,
Yes , I've done the steps that you mentioned earlier , however there are too much logs because the server has not been rebooted for quite some time . I'm finding the way to display the logs all in one shot without keying in CR at each page .

Anyway , thanks for your input .
Dennis Handly
Acclaimed Contributor

Re: How to dump all SL logs in GSP

>way to display the logs all in one shot without keying in CR at each page.

If there is typeahead, just hold the key down. Or put something on it.
Torsten.
Acclaimed Contributor

Re: How to dump all SL logs in GSP

It depends on machine model and firmware if you have a dump option or not:

GSP> sl

Chassis Logs available:

(A)ctivity Log
(E)rror Log
(L)ive Chassis Logs

(C)lear All Chassis Logs
(Q)uit

GSP:> e

To Select Entry:
( or ) View next or previous block
(+) View next block (forwards in time)
(-) View previous block (backwards in time)
(D)ump entire log for capture and analysis
(F)irst entry
(L)ast entry
(J)ump to entry number
(V)iew Mode Select
(H)elp to repeat this menu
^B to exit




Here is (D) for dump available.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!