Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

KVM Switch for RP4440

Dharmu
Contributor

KVM Switch for RP4440

Hi,

I would apperciate if some one helps to configure the KVM switch for RP4440 server.And also kindly confirm whether i can get remote console login for the KVM switch with IP based.I had 4 RP4440 servers to be configure with KVM and IP based console remotely from my desktop to enable the CDE session.

Thanks & Regards
Dharmu
2 REPLIES
Torsten.
Acclaimed Contributor

Re: KVM Switch for RP4440

Hi Dharmu,

the standard model doesn't have VGA. This port is disabled and only works in the Integrity server rx4640 (same chassis).

So a KVM switch can only be connected via serial line, but for this you can also use the built-in MP IP connection.

You can work with CDE via "normal" IP network, so I think you don't really need any KVM switch or you can't even use it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Dharmu
Contributor

Re: KVM Switch for RP4440

Hi,

I already installed Graphics card on all servers.