Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Looking for SD3200 IOX blower P/N

cartman_2
Frequent Advisor

Looking for SD3200 IOX blower P/N

Hi,

I have a failed cabinet blower on a IO expansion cabinet in a SD3200.

[Cabinet]
8 IOX 2/ 1/ N- 4/ 0/ N+ 2/ 0/ N+

Cabinet Blowers
===============
Fan 0 failed
Fan 1 ok

I/O Bay 0
===========
Fan 0 ok
Fan 1 ok
Fan 2 ok
Fan 3 ok

Bulk Power Supplies(BPS)
========================
Power Supply 0 ok
Power Supply 1 ok

From EMS output:

Device identification information:

Number of fans present...................: 2
Location of fan(s).......................: I/O expansion cabinet 8
Present fan number(s)....................: 0,1
Missing or failed fan number(s)..........: 0

I was triying to get a P/N for this blower, but with no success, If i'm correct this cabinet blowers refer to one of the 2 installed(4 possible) ICE fans installed is this correct?

there is no info on P/N in the df output of the IOX either.

Could you please give me a P/N for these blowers and confirm if these blowers are the ones on the rear on the ICE cabinet?

Thanks
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Looking for SD3200 IOX blower P/N

I would expect to find the part number at partsurfer.hp.com - did you search there?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
cartman_2
Frequent Advisor

Re: Looking for SD3200 IOX blower P/N

Yes, the problem is that in partsurfer there are serveral fan/blower part numbers inside the superdome 9000 server/IOX, and with the description I can't pinpoint the one that I need for the IOX blower:


A5201-62048 Blower module - Includes one blower and mounter hardware - Mounts on top of the chassis
A5201-04072 I/O fan module - Includes fan, finger guard, mounting bracket, cable, and operational, caution, and fuse
A5861-62022 Cooling fan for expansion utility chassis

So it was just in case someone new the correct partnumber and also if the cabinet blower that comes in the output of parstatus is tje blowers on the back of the ICE cab

Torsten.
Acclaimed Contributor

Re: Looking for SD3200 IOX blower P/N

I think the part in question is the XUC fan A5861-62014.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!