Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
cancel
Showing results for 
Search instead for 
Did you mean: 

Memory Issue

Pravamsi
Occasional Contributor

Memory Issue

I have SX2000 superdome.
It has 2 Npars. Npar 0 has few problems - HPMC occured. But Npar 1 is working fine.
The vpars in Npar 1 shows many errors related to Npar 0. The Npars 0 HPMC has not been rectified yet. But the VFP for Npar 1 shows unknown for all the cells, how ever it is up and running fine with no faults..

For Npar 1
===========
Please select partition number: 1
# Partition state Activity
- --------------- --------
# Cell state Activity
- ---------- --------
1 OS heartbeat: * 0 Logs
8 Unknown Unknown 0 Logs
9 Unknown Unknown 0 Logs
1 0Unknown Unknown 0 Logs
1 1Unknown Unknown 0 Logs
1 2Unknown Unknown 0 Logs
1 3Unknown Unknown 0 Logs
1 4Unknown Unknown 0 Logs
1 5Unknown Unknown 0 Logs
================


For Npar 0
----------
Please select partition number: 0
# Partition state Activity
- --------------- --------

# Cell state Activity
- ---------- --------
0 OS heartbeat: * 1382 Logs
0 Cell has joined partition 470 Logs
1 Cell has joined partition 369 LogsW
2 Cell has joined partition 481 Logs
3 Cell has joined partition 354 LogsW
4 Cell has joined partition 475 LogsW
5 Cell has joined partition 471 Logs
6 Cell has joined partition 526 Logs
7 Cell has joined partition 354 Logs
============================================


[DR-SD1] MP:CM> cp

-------------------------------+
Cabinet | 0 | 1 |
-------------+--------+--------+
Slot |01234567|01234567|
-------------+--------+--------+
Partition 0 |XXXXXXXX|........|
Partition 1 |........|XXXXXXXX|

[DR-SD1] MP:CM> io

--------------------------+
Cabinet | 0 | 1 |
--------+--------+--------+
Slot |01234567|01234567|
--------+--------+--------+
Cell |XXXXXXXX|XXXXXXXX|
IO Cab |0.8.000.|1..111..|
IO Bay |0.0.011.|1..010..|
IO Chas |3.3.131.|1..133..|
===============================

My question is: Why the VFP for Npar 1 shows like that?
1 REPLY
Pravamsi
Occasional Contributor

Re: Memory Issue