HPE Community
HPE 9000 and HPE e3000 Servers
1753425 Members
5180 Online
108793 Solutions
New Discussion юеВ

Re: N4000 Memory Error

 
SOLVED
Go to solution
Paul Coffey_1
Advisor

тАО11-18-2009 12:45 PM

тАО11-18-2009 12:45 PM

N4000 Memory Error

I have dimm that needs to be replaced. Can anyone confirm that I'm reading this correctly and the memory in question is on memory extender 3.

Thanks

The memory component:

Cab/Cell or Node: 0
MC/EXT: 3
DIMM: 0b

is experiencing a high rate of correctable single bit errors on a
single component.
0 Kudos
3 REPLIES 3
Sameer_Nirmal
Honored Contributor

тАО11-18-2009 01:23 PM

тАО11-18-2009 01:23 PM

Solution

Re: N4000 Memory Error

Yes, the DIMM in question is on memory extender 3 in slot "0b".
Paul Coffey_1
Advisor

тАО11-18-2009 01:37 PM

тАО11-18-2009 01:37 PM

Re: N4000 Memory Error

Great. Thanks.
0 Kudos
Torsten.
Acclaimed Contributor

тАО11-18-2009 09:48 PM

тАО11-18-2009 09:48 PM

Re: N4000 Memory Error

To ensure this is really a hardware problem, you should reboot (this will ensure the diag system has access and can test)and watch it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.