Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
Showing results for 
Search instead for 
Did you mean: 

N4000 Memory Error

Go to solution

N4000 Memory Error

I have dimm that needs to be replaced. Can anyone confirm that I'm reading this correctly and the memory in question is on memory extender 3.


The memory component:

Cab/Cell or Node: 0
DIMM: 0b

is experiencing a high rate of correctable single bit errors on a
single component.
Honored Contributor

Re: N4000 Memory Error

Yes, the DIMM in question is on memory extender 3 in slot "0b".

Re: N4000 Memory Error

Great. Thanks.
Acclaimed Contributor

Re: N4000 Memory Error

To ensure this is really a hardware problem, you should reboot (this will ensure the diag system has access and can test)and watch it.

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!