HPE 9000 and HPE e3000 Servers
1748049 Members
5068 Online
108757 Solutions
New Discussion

Re: N4000 can't boot - keeps crashing

 
cpdla
Advisor

N4000 can't boot - keeps crashing

ISL booting  hpux

Boot
: disk(0/0/2/1.6.0.0.0.0.0;0)/stand/vmunix
10432512 + 2035712 + 18735928 start 0x200c68

alloc_pdc_pages: Relocating PDC from 0xffff800000 to 0x7fa01000. 

Console reset done.

Boot device reset done.

       ******* Unexpected HPMC. Processor HPA FFFFFFFF'FED61000 *******

 

attached is the pim output

 

your help is much appreciated

 

 

3 REPLIES 3
S_Logan
HPE Pro

Re: N4000 can't boot - keeps crashing

Hi ,

 

According to HPMC/ts99 file:

System Bus Adapter -- System Bus Interface
------------------------------------------

Timestamp =    Fri Nov  23 11:41:56 GMT 2012    (20:12:11:23:11:41:56)

  OV  RQ  RS      ESTAT      A  C  D  corr  unc  fe  cw  pf
  --  --  --      -----      -  -  -  ----  ---  --  --  --
  X       X     ERR_ERROR       X                X      

IO Requestor Address    = 0x0000000000000000
IO Target Address       = 0x0000000000000000
IO Responder Address    = 0xfffffffffed40000
IO Physical Location    = 0x000000ffffffff82
IO Hardware Path        = 0x00ffffffffffff01

Module Error Register   = 0x0000000007ff0034


Local Bus Adapter  --        PCI Interface
------------------------------------------

Timestamp =    Fri Nov  23 11:41:57 GMT 2012    (20:12:11:23:11:41:57)

  OV  RQ  RS      ESTAT      A  C  D  corr  unc  fe  cw  pf
  --  --  --      -----      -  -  -  ----  ---  --  --  --
          X     ERR_PARITY         X             X      

IO Requestor Address    = 0x0000000000000000
IO Target Address       = 0x0000000000000000
IO Responder Address    = 0xfffffffffece4000
IO Physical Location    = 0x000202ffff0aff83
IO Hardware Path        = 0x00ffffffffff0102

Module Error Register   = 0x0000000000000014


 

 

Possible issue with the PCI interface, Please remove the PCI cards and try to boot the system.

 

Please update the result.

 

HTH,

 

Regards,

Surendar

Was the post useful?

Say Thank you by Clicking the WHITE KUDOS! Star.

For HP Guided Troubleshooting; http://www.hp.com/support/hpgt

 

I work for HPE

Accept or Kudo


[Any personal opinions expressed are mine, and not official statements on behalf of Hewlett Packard Enterprise]
PrashanthShetty
Occasional Advisor

Re: N4000 can't boot - keeps crashing

Hi,

 

As you are aware this is a HW induced crash and this is caused by the PCI card in slot 10, hardware path 1/2, if the system is unbootable then i would suggest you to remove this card and try to bring up the machine.

 

Best Regards,

Prashanth

 

I am an HP Employee...

Ivan_Sark
Occasional Advisor

Re: N4000 can't boot - keeps crashing

I agree. I had almost an identical issue with slot 8. Any card in that slot would crash the system. I changed the Left PCI I/O backplane board. Box came up fine.