HPE 9000 and HPE e3000 Servers
1748179 Members
3970 Online
108758 Solutions
New Discussion юеВ

Re: PCI Power Supply not turn On!

 
SOLVED
Go to solution
Arvin E.
Frequent Advisor

PCI Power Supply not turn On!

Dear all,

I have problem in my rp7410,
I replace the System backplane and now when I want to power on server, PCI Power Supply LED not turn on!
How can I solve it?
I insert one cell in position 0. When I power on server it shows in VFP cell state starting and after about 350 log it restart!

Thanks in advance
Arvin
6 REPLIES 6
Torsten.
Acclaimed Contributor
Solution

Re: PCI Power Supply not turn On!

If you have only 1 cell, it should be at position 1, not 0.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Arvin E.
Frequent Advisor

Re: PCI Power Supply not turn On!

Thank you Torsten,
I follow the rules of inserting cpu and memory to cell board, and insert cell in position 1 instead of 0, and now PCI power supply is turn on, and cell joined the partition.
but I don't know how can it be related to this problem.

Thanks anyway.
Arvin
Torsten.
Acclaimed Contributor

Re: PCI Power Supply not turn On!

first cell must be 1, second cell 0

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Arvin E.
Frequent Advisor

Re: PCI Power Supply not turn On!

Now I have another problem,
When I insert another cell in position 1, and remove first cell, I get error "PDH_CELL_INFO_CORE_IO_UPDATE_ERR" and server going to restart.

what is it?

Torsten.
Acclaimed Contributor

Re: PCI Power Supply not turn On!

Not exactly sure, but maybe the other cell has another firmware level installed?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Arvin E.
Frequent Advisor

Re: PCI Power Supply not turn On!

This exactly what I must do, as you said I upgrade firmware two cells now have same firmware and problem solved.

Thanks a lot
Arvin