HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Problems booting machine

dictum9
Super Advisor

Problems booting machine


Any idea what this means? The machine is A500 running 11.23.


************* SYSTEM ALERT **************
SYSTEM NAME: uninitialized
DATE: 12/12/2008 TIME: 22:05:16
ALERT LEVEL: 6 = Boot possible, pending failure - action required

REASON FOR ALERT
SOURCE: 8 = I/O
SOURCE DETAIL: 3 = local bus adapter SOURCE ID: FF
PROBLEM DETAIL: 6 = configuration error

LEDs: RUN ATTENTION FAULT REMOTE POWER
FLASH FLASH OFF OFF ON
LED State: Running non-OS code. Non-critical error detected.
Check Chassis and Console Logs for error messages.

0x2000006683FF2164 000000FF FF02FF83 - type 4 = Physical Location
0x5800086683FF2164 00006C0B 0C160510 - type 11 = Timestamp 12/12/2008 22:05:16
A: ack read of this entry - X: Disable all future alert messages
Anything else skip redisplay the log entry
->Choice:
3 REPLIES
cnb
Honored Contributor

Re: Problems booting machine

This guide should help you to isolate:
http://docs.hp.com/en/2411/rp24xx_customer.pdf

HTH,
Niceguy_2
Advisor

Re: Problems booting machine

Hi

Please boot in single user mode and check the filesytem with fsck whether any filesytem has corrupted and then try to boot to multiuser from single usr mode.This will resolve the issue.

Regards,
Niceguy

jaivinder
Frequent Advisor

Re: Problems booting machine

Check the MP logs and try to boot the system in the single user mode. After booting try to run the cstm diagnostics on all of the IO devices.