Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Reset of GSP on superdome

SOLVED
Go to solution
Andrew medhurst1
Frequent Advisor

Reset of GSP on superdome

guys
i have two superdomes that seem to have aqiured the same issue.
i.e i cannot get a connection to the lan console, attaching locally to the remote console the GSP seems fine.
i have tried to disable and reenable the lan console, no change.
i have connected a lan cable from a 8440 lan console that works on the same subnet and it gives the same error so not a switch port issue.
if it was only one superdome i would think about lan connection point, but on both ??.
only other thing i can do is reset GSP and see if that cures it, but how do i do that.
regards
andrew
3 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Reset of GSP on superdome

Do this first:

Check if the cable is connected to the public port (next to the private port) - the private is intended for the SMS only.

(Double) Check the LAN config again.

MP:CM> ls or lc

Did you try telnet or ssh?

Check if one of them is disabled.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Andrew medhurst1
Frequent Advisor

Re: Reset of GSP on superdome

torsten
i have tried telnet as ssh is not an option to the GSP as far as i know and as it is enabled on the GSP.
i have checked config and all is correct so still abit stumped.
Torsten.
Acclaimed Contributor

Re: Reset of GSP on superdome

Do you have this option on your system?

This is an example from a sx2000 Superdome:

MP:CM> sa

This command displays and allows modification of access parameters.

T - Telnet access : Enabled
H - SSH access : Enabled
W - Web Console : Disabled
N - Network Diagnostics : Enabled
D - DIAG Menu : Disabled
I - IPMI Lan access : Enabled
G - Windows Debug Client : Disabled
A - HP SIM Identification : Disabled

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!