Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Secure Web Console Issues

Pete G
Advisor

Secure Web Console Issues

Hello. I am having a problem that is affecting all eight of my HP Secure Web Consoles.

I am in the processes right now having the speed and duplex settings verified for each ethernet connection and so far the majority seem to be set at 10 half with two of them at 10 full. Irregardless, all display the same issue...I often get 403 Forbidden messages.

"Error: Prospero access denied
Cause: The maximum number of clients are connected.

Try again later... "

Now if I constantly keep retrying I will eventually get access to the console. Since I get this on all of the web consoles, I don't think it's a problem with the duplex settings.
Can anyone shed some light on what could possibly be causing this problem? Could it be somthing so simple that I am overlooking?

Many thanks in advance.
4 REPLIES
Torsten.
Acclaimed Contributor

Re: Secure Web Console Issues

Do we talk about the small grey boxes?
Sometimes there is a bit confusion about this.
Check if all have the same firmware.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Pete G
Advisor

Re: Secure Web Console Issues

Yes, the small grey boxes. We're not talking about GSP. They are connected via RS-232 cables. All the firmware is identical on them.

Thanks,
Pete
Torsten.
Acclaimed Contributor

Re: Secure Web Console Issues

The latest version was A.2.0 - do you have it?

reg: The maximum number of clients are connected.

You probably need to logout some clients or reset the SWC.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Pete G
Advisor

Re: Secure Web Console Issues

All the SWCs are running 1.9 of the firmware. I have reset these devices on numerous occassions and still get the maximum number of connections error. Stupid question but how exactly would I be "logging them out?" It's just me trying to connect. There is no one else.

Thanks,
Pete