Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Serial number of a RP box

shashi kanth
Super Advisor

Serial number of a RP box

From MP, how can i get a serial number of box ?
3 REPLIES
Stefan Stechemesser
Honored Contributor

Re: Serial number of a RP box

Hi,

this is only possible on cellbased servers with the "id" command in cm> menue.

For entry level servers (f.e. rp3440 or rp4440) you have to enter on HPUX

getconf CS_MACHINE_SERIAL

(man getconf ;-) )

best regards

Stefan
Torsten.
Acclaimed Contributor

Re: Serial number of a RP box

On some systems (e.g. Integrity Blades BL860c, BL870c, Integrity servers rx2660, rx3600, rx3600) you can get this from

MP:CM> df

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
shashi kanth
Super Advisor

Re: Serial number of a RP box

Thanks.