Simpler Navigation for Servers and Operating Systems - Please Update Your Bookmarks
Completed: a much simpler Servers and Operating Systems section of the Community. We combined many of the older boards, so you won't have to click through so many levels to get at the information you need. Check the consolidated boards here as many sub-forums are now single boards.
If you have bookmarked forums or discussion boards in Servers and Operating Systems, we suggest you check and update them as needed.
HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Specs required for K-Class and R-Class

SOLVED
Go to solution
Kishore Anand
Occasional Advisor

Specs required for K-Class and R-Class

Hi all,
I need the following specs about K380 & R390:
1. Heat dissipation in BTU
2. Weight in Kilograms.

This is what I have found so far:
1. K380 - 5800 BTU/Hr. - 132.3 lb.
2. R390 - - 38 Kgs.

Please help

Thanks
Anand Kishore
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Specs required for K-Class and R-Class

Hi Anand Kishore,

since both servers are really old now (~10 years), there are no quickspecs available like for newer or current hardware.

You may have a look into the various guides if you can find the info you are looking for:

K-class:
http://docs.hp.com/en/hw.html#K-Class%20Server

D- & R-class:
http://docs.hp.com/en/hw.html#R-Class%20Server

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Kishore Anand
Occasional Advisor

Re: Specs required for K-Class and R-Class

Thanks Torsten,
I have verified them I could not find the Heat dissipation specification for R390.

S_Logan
HPE Pro
Solution

Re: Specs required for K-Class and R-Class

Hi Kishore,


Both The servers are very old*

pls find the BTU/hr details Extracted :

Power Specifications:
(Jan 00)
Max Power Anticipated (Source - Nov 99 Ordering Guide)Server/ Model Phase
Current (A) Power (KVA) Power (Watts) Heat Generated (BTU/HR)

K580 - A4837A Single 10 (@ 220V) 1.8 (1700) 5800
R390 - A5178A Single 4.1 (@ 230V) .93 (930) 3174

Typical Power Anticipated (Source - Nov 99 Ordering Guide)Server/ Model Phase
Current (A) Power (KVA) Power (Watts) Heat Generated (BTU/HR)

K580 - A4837A Single (1020) *3478
R390 - A5178A Single (635) *2156

(Note: BTU/Hr = 3.41 x Watts)

(N/A- Not available)

* = calculated value

Surendar
I work for HPE

If you feel this solution was helpful please click the KUDOS! thumb below!