HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

TC from webconsole

sen_ux
Valued Contributor

TC from webconsole

Is it possible to initiate TC from webconsole.?
4 REPLIES
Yogesh M Puranik
Valued Contributor

Re: TC from webconsole

Hi,

Yes it is possible to initiate TC from webconsole, but it is not at all recoomand in production env.


Rgds

YMP

sen_ux
Valued Contributor

Re: TC from webconsole

I could not see any thing from Webconsole.Please explaing how to do it..
Steps if possible.
Torsten.
Acclaimed Contributor

Re: TC from webconsole

What server do you have?

If supported, click on "TOC" and confirm.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor

Re: TC from webconsole

Look in "virtual devices" -> Reset through INIT or TOC signal

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!