HP 9000 and HP e3000 Servers
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to login into GSP from Lan Console

SOLVED
Go to solution
GabrielHuerta
Occasional Advisor

Unable to login into GSP from Lan Console

I can login into GSP from local connection, but when I try to log into GSP from lan console the GSP refuse the login.
Any idea.

GESSIS01:/home/root# telnet consola-monito2
Trying...

Connected to consola-monito2.
Escape character is '^]'.
Local flow control off

Service Processor login:
Service Processor password:


Service Processor login:
Service Processor password:


Service Processor login:
Service Processor password:

Connection closed by foreign host.
4 REPLIES
Torsten.
Acclaimed Contributor

Re: Unable to login into GSP from Lan Console

You need to input your user credentials when connecting over LAN.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Torsten.
Acclaimed Contributor
Solution

Re: Unable to login into GSP from Lan Console

Did you already set up a user?

GSP> so


SO

This command allow you to modify the security options and access control.

GSP wide parameters are:
. Login Timeout: 1 minutes.
. Number of Password Faults allowed: 3
. Flow Control Timeout: 5 minutes.

Do you want to modify the GSP wide parameters? (Y/[N])


User number 1 parameters are:
. User's Name:
. User's Login:
. Organization's Name:
. Dial-back configuration: Disabled
. Access Level: Operator
. Mode: Single
. User's state: Disabled

Do you want to modify the user number 1 parameters? (Y/[N]/Q to quit) y
y

Current User's Name:
Enter new User's Name: root
root
New User's Name: root
Confirm? (Y/[N]): y
y
-> User's Name will be updated.

Current Organization's Name:
Do you want to modify it? (Y/[N])

Enter new Login: root
root
Enter new Login for confirmation: root
root
-> Login will be updated.

Do you want to modify the current password? (Y/[N]) y
y
Enter new Password:
Enter new Password for confirmation:
-> Password will be updated.

Current Dial-back configuration: Disabled
Do you want to modify it? (Y/[N])


User number 2 parameters are:
. User's Name:
. User's Login:
. Organization's Name:
. Dial-back configuration: Disabled
. Access Level: Operator
. Mode: Single
. User's state: Disabled

Do you want to modify the user number 2 parameters? (Y/[N]/Q to quit) q

q

-> Settings have been updated.
User may be disconnected in this process



Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
GabrielHuerta
Occasional Advisor

Re: Unable to login into GSP from Lan Console

Torsten,
tou are a machine.
Thanks a lot.
Torsten.
Acclaimed Contributor

Re: Unable to login into GSP from Lan Console

You are welcome.

Some explanation ... older systems having a GSP doesn't have a default user, but you need to configure a user in order to be able to log on over the network.

Newer servers (with MP) have 2 default users: Admin/Admin and Oper/Oper.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!