Webconsole problem!

[Zhou Feilong]

I have setup a webconsole and it gone well. But for some reason I forget my administrator password. I only create a user(administrator). Now I can't login from webconsole to modify webconsole-accout information.
What can I do?

Thank in advance!

[S.K. Chan · Accepted solution]

The only way for you is to reset the web console. You will lose the Web Console configuration and have to reconfigure it again. To reset it ..
- Disconnect power from the device.
- Press and hold the button on the device while you connect back the power cable.
- Then release the button.
Just in case (the online doc) ..
http://docs.hp.com//hpux/onlinedocs/hw/swc/secureweb/tour.html

[MANOJ SRIVASTAVA]

Hi Zhou

Also you can look at this :

http://forums.itrc.hp.com/cm/QuestionAnswer/1,,0x000f8f960573d611abdb0090277a778c,00.html




1.Disconnect the webconsole.
2.Press the centre button and swtich it on , hold it for 2-5 seconds . This will reset the IP of the webconsole to 192.0.0.192.
3.Conenct a pc OR A Laptop with a cross lan cable .
4.Change the IP adddress of the PC to a say 192.0.0.193 and subnet mask 255.255.255.0
5.Connect using the explore and typing 192.0.0.192 adrres.
5. Reconfigure the same for the HP Server and connect it back.


Manoj Srivastava